| No | Draft Myanmar Standards | Abstract/Scope | Committee | Open Date | Close Date |
|---|---|---|---|---|---|
| 1 | DMMS ISO 21001:2018 Educational organizations — Management systems for educational organizations — Requirements with guidance for use |
 |
TC4-Technical Sub Committee for Management System | 31.12.2020 | 15.01.2021 |
| 2 | DMMS ISO 31000:2018 Risk management — Guidelines |
|
TC4-Technical Sub Committee for Management System | 31.12.2020 | 15.01.2021 |
| 3 | DMMS ISO/TR 31004:2013 Risk management — Guidance for the implementation of ISO 31000 |
|
TC4-Technical Sub Committee for Management System | 31.12.2020 | 15.01.2021 |
| 4 | DMMS ISO 37001:2016 Anti-bribery management systems — Requirements with guidance for use |
|
TC4-Technical Sub Committee for Management System | 31.12.2020 | 15.01.2021 |
| 5 | DMMS ISO 50004:2020 Energy management systems — Guidance for the implementation, maintenance and improvement of an ISO 50001 energy management system |
|
TC15-Technical Sub Committee for Energy | 31.12.2020 | 15.01.2021 |
| 6 | DMMS ISO 14002-1:2019 Environmental management systems — Guidelines for using ISO 14001 to address environmental aspects and conditions within an environmental topic area — Part 1: General |
|
TC18-Technical Sub Committee for Environmental Protection | 31.12.2020 | 15.01.2021 |
| 7 | DMMS ASTM D92 -18
(လျှပ်လက်မှတ်) Flash နှင့် (မီးတောက်မှတ်) Fire point များအား Cleveland Open Cup (Cleveland စမ်းသပ်ခွက်အပွင့်) စမ်းသပ် ကိရိယာဖြင့် စမ်းသပ်ခြင်းအတွက် စံထားရှိသည့် စမ်းသပ် နည်းလမ်း |
|
TC9-Technical Committee for Building and Construction | 11.9.2020 | 15.10.2020 |
| 8 | DMMS ASTM D70-18a
Semi-Solid Asphalt Binder သိပ်သည်းဆကို စမ်းသပ်ခြင်း အတွက် စံထားရှိသည့် စမ်းသပ်နည်းလမ်း (Pycnometer နည်းလမ်း) |
|
TC9-Technical Committee for Building and Construction | 11.9.2020 | 15.10.2020 |
| 9 | DMMS ISO 9426:2003- Wood based panels- Determination of dimensions of panels | |
TC16-Technical Committee for Wood Based Product | 11.9.2020 | 15.10.2020 |
| 10 | DMMS ISO 16999:2003- Wood based panels- Sampling and cutting of test pieces | |
TC16-Technical Committee for Wood Based Product | 11.9.2020 | 15.10.2020 |
| 11 | DMMS ISO 9424:2003- Wood based panels- Determination of dimensions of test pieces | |
TC16-Technical Committee for Wood Based Product | 11.9.2020 | 15.10.2020 |
| 12 | DMMS ISO 16979:2003- Wood based panels- Determination of moisture content | |
TC16-Technical Committee for Wood Based Product | 11.9.2020 | 15.10.2020 |
| 13 | DMMS ISO 16983:2003- Wood based panels- Determination of swelling in thickness after immersion in water | |
TC16-Technical Committee for Wood Based Product | 11.9.2020 | 15.10.2020 |
| 14 | DMMS ISO 16987:2003- Wood based panels- Determination of moisture resistance under cyclic test conditions | |
TC16-Technical Committee for Wood Based Product | 11.9.2020 | 15.10.2020 |
| 15 | DMMS ISO 16981:2003- Wood bsed panels- Determination of Surface soundness | |
TC16-Technical Committee for Wood Based Product | 11.9.2020 | 15.10.2020 |
| 16 | DMMS ISO 16978:2003- Wood based panels- Determination of modules of elasticity in bending and of bending strength | |
TC16-Technical Committee for Wood Based Product | 11.9.2020 | 15.10.2020 |
| 17 | DMMS ISO 16984:2003- Wood based panels- Determination of tensile strength perpendicular to the plane of the panel | |
TC16-Technical Committee for Wood Based Product | 11.9.2020 | 15.10.2020 |
| 18 | DMMS ISO 20585:2005- Wood based panels- Determination of wet bending strength after immersion in water at 70 degrees C or 100 degrees C (boiling temperature) | |
TC16-Technical Committee for Wood Based Product | 11.9.2020 | 15.10.2020 |
| 19 | DMMS ISO 7170:2005- Furniture- Storage units- Determination of strength and durability | |
TC16-Technical Committee for Wood Based Product | 11.9.2020 | 15.10.2020 |
| 20 | DMMS ISO 38200:2018- Chain of custody of wood and wood-based products | |
TC16-Technical Committee for Wood Based Product | 11.9.2020 | 15.10.2020 |
| 21 | DMMS ISO 9709:2018- Structural timber- Visual strength grading- Basic principles | |
TC16-Technical Committee for Wood Based Product | 11.9.2020 | 15.10.2020 |
| 22 | DMMS ISO 12122-1:2014- Timber structures- Determination of characteristics values-Part 1: Basic requirements | |
TC16-Technical Committee for Wood Based Product | 11.9.2020 | 15.10.2020 |
| 23 | DMMS ISO 12122-2:2014- Timber structures- Determination of characteristics values-Part 2: Sawn timber | |
TC16-Technical Committee for Wood Based Product | 11.9.2020 | 15.10.2020 |
| 24 | DMMS ISO 12122-3:2016- Timber structures- Determination of characteristics values-Part 3: Glued laminated timber | |
TC16-Technical Committee for Wood Based Product | 11.9.2020 | 15.10.2020 |
| 25 | DMMS ISO 12122-4:2017- Timber structures- Determination of characteristics values-Part 4: Engineered wood products | |
TC16-Technical Committee for Wood Based Product | 11.9.2020 | 15.10.2020 |
ဖော်ပြပါ မြန်မာစံချိန်စံညွှန်း(မူကြမ်း) များ နှင့်ပတ်သက်၍ သဘောထား မှတ်ချက်များ ပေးပို့လိုပါက standards.mstrd@ gmail.com နှင့် [email protected] သို့ ပေးပို့နိုင်ပါသည်။
